Toyota Files Voluntary Safety Recall on Select Toyota Division Vehicles for Sticking Accelerator Pedal

TORRANCE, Calif., January 21, 2010 -- Toyota Motor Sales (TMS), U.S.A., Inc, today announced it would recall approximately 2.3 million vehicles to correct sticking accelerator pedals on specific Toyota Division models. This action is separate from the on-going recall of approximately 4.2 million Toyota and Lexus vehicles to reduce the risk of pedal entrapment by incorrect or out of place accessory floor mats. Approximately 1.7 million Toyota Division vehicles are subject to both separate recall actions.

“In recent months, Toyota has investigated isolated reports of sticking accelerator pedal mechanisms in certain vehicles without the presence of floor mats,” said TMS Group Vice President Irv Miller. “Our investigation indicates that there is a possibility that certain accelerator pedal mechanisms may, in rare instances, mechanically stick in a partially depressed position or return slowly to the idle position. Consistent with our commitment to the safety of our cars and our customers, we have initiated this voluntary recall action.”

Toyota’s accelerator pedal recall is confined to the following Toyota Division vehicles:

• 2009-2010 RAV4, • 2009-2010 Corolla, • 2009-2010 Matrix, • 2005-2010 Avalon, • 2007-2010 Camry, • 2010 Highlander, • 2007-2010 Tundra, • 2008-2010 Sequoia

No Lexus Division or Scion vehicles are affected by this recall action. Also not affected are Toyota Prius, Tacoma, Sienna, Venza, Solara, Yaris, 4Runner, FJ Cruiser, Land Cruiser and select Camry models, including all Camry hybrids.

The condition is rare, but can occur when the pedal mechanism becomes worn and, in certain conditions, the accelerator pedal may become harder to depress, slower to return or, in the worst case, stuck in a partially depressed position. Toyota is working quickly to prepare the correction remedy.

In the event that a driver experiences an accelerator pedal that sticks in a partial open throttle position or returns slowly to idle position, the vehicle can be controlled with firm and steady application of the brakes. The brakes should not be pumped repeatedly because it could deplete vacuum assist, requiring stronger brake pedal pressure. The vehicle should be driven to the nearest safe location, the engine shut off and a Toyota dealer contacted for assistance.

Toyota will continue to investigate incidents of unwanted acceleration and take appropriate measures to address any trends that are identified.

Toyota owners who have questions or concerns should contact the Toyota Customer Experience Center at 1-800-331-4331. Also, you can schedule service online for your recalled vehicle at www.toyotaoforlando.com

Toyota Begins Production of Third-Generation Sienna at Indiana Plant

PRINCETON, Ind. (January 20, 2010) – Production of the all-new 2011 Sienna minivan is underway at Toyota Motor Manufacturing, Indiana (TMMI) in Princeton, Ind. Fully redesigned to meet the needs of consumers, the new Sienna was styled at Toyota’s Calty Design Research Center in Newport Beach, Calif., and developed at the Toyota Technical Center in Ann Arbor, Mich.

Production of the new Sienna, as well as Highlander production that began last October, is welcome news for the Indiana plant as it was underutilized during the current economic downturn.

Staying Afloat During Challenging TimesThe facility’s 4,200 team members are confident that improvements they made during the economic downturn assured a successful Sienna and Highlander launch. Already grappling with the sales impact of escalating gas prices following Hurricane Katrina, the plant faced an uncertain future when the banking and housing crisis brought the economy to its knees and the auto industry with it.

TMMI came to a critical crossroads in mid-2008 as Toyota experienced significant overcapacity in North America. As a partial solution, Toyota consolidated production of the Tundra full-size pickup – originally built at TMMI – into its Texas facility. Toyota also decided to begin building the Highlander mid-size SUV in Indiana by late 2009.

However, prior to the start of Highlander production, TMMI was temporarily left with only two vehicles – the Sienna minivan and the Sequoia full-size SUV – on its pair of assembly lines. The consequence for TMMI was significant over-staffing for more than one year.

“Without a doubt, our team members were worried,” said Wil James, senior vice president of TMMI. “Layoffs were happening all over the auto industry. It would be many months before Highlander production began. As a result, half of our team members were not building vehicles.”

Fixing this problem was important not only to Toyota and its suppliers, who employ thousands of people in Indiana and many other states, but critical for the well-being of the southwestern Indiana community that relies so heavily on the jobs created by TMMI. Investment in Team Members and FacilitiesToyota invested approximately $450 million to upgrade the plant. With the start of Highlander production at TMMI last October, and the recent launch of the all-new Sienna, the plant’s outlook has improved dramatically.

TMMI’s survival story is rooted in the way it treated team members during the downturn, an approach far different from most manufacturers. TMMI and other Toyota plants in North America capitalized upon the skill and know-how of team members rather than conduct layoffs.

“It made more sense to further invest in our experienced team members,” James said. “We refocused our work. When we weren’t building vehicles, we were preparing for a brighter future.”

TMMI implemented a training program where team members gained a deeper understanding of the Toyota Production System and fundamental Toyota auto manufacturing skills. The anticipated result is even stronger application of this knowledge to the production line.

“It’s difficult to roll out such comprehensive training when the line is moving,” James said. “Our company spent a lot of time developing the best way to do every job in the plant, so the downturn was actually a great opportunity to complete this training in order to sharpen our skills.”

Team Members Lead ImprovementsTMMI also encouraged team members to further kaizen, a Japanese term for continuous improvement. No ideas for improving processes and reducing waste were too small; in fact, hundreds of improvements were implemented resulting in an estimated savings of more than $7 million.

Other team member ideas bolstered safety and ensured consistent quality. For example, the installation of the lower front console on the all-new Sienna put the team member in an awkward position. Team members found a small power tool that ensured the console snapped securely in place every time while eliminating an ergonomic issue.

“Our team members know better than anyone else how to do their jobs and they always have the flexibility to change processes in order to improve safety, quality and efficiency,” James said. “Again, big improvements are difficult when the line is running. But the downtime allowed for significant advancements.

“The power of more than 4,000 people working together on this type of activity is incredible. Our decision to fully utilize our team members was expensive, but it’s paying off already. Currently, our quality is much better than it’s ever been and our safety is among the best in Toyota.” Shared SacrificeToyota offset some of the cost by adopting a “shared sacrifice” approach, including the elimination of executive and salaried bonuses, executive pay cuts, production team member bonus reductions, overtime elimination, and a hiring freeze.

“These were responsible, step-by-step measures designed to help us protect employment security and strengthen our company over the long term,” James said. “Now, as the market slowly returns, we are in a great position.” About ToyotaToyota (NYSE:TM) established operations in North America in 1957 and currently operates 14 manufacturing plants. Toyota directly employs nearly 41,000 in North America and its investment here is currently valued at more than $23 billion, including sales and manufacturing operations, research and development, financial services and design. Toyota's annual purchasing of parts, materials, goods and services from North American suppliers totals nearly $25 billion.

Toyota currently produces 12 vehicles in North America, including the Avalon, Camry, Corolla, Highlander, Matrix, RAV4, Sienna, Sequoia, Tacoma, Tundra, Venza and the Lexus RX 350.

Toyota Companies Pledge $500,000 to Haiti Relief Effort

January 15, 2010 - New York, NY – Toyota today announced a total of $500,000 in donations to be divided equally among the American Red Cross, Save the Children and Doctors Without Borders in support of their relief and recovery efforts for earthquake victims in Haiti. In addition, all Toyota companies will match team member and associate contributions to these organizations.

Commenting on the donations, Yoshi Inaba, president and chief operating officer of Toyota Motor North America, Inc., said, “All of Toyota’s nearly 34,000 associates and team members in the United States express their sincere condolences to the victims and families affected by the earthquake in Haiti. Our hope is that Toyota’s support will quickly aid those in need, and we thank all three organizations for their courageous efforts in the region.”